Silvercrest Energy Monitor - Manual (Page 27)

29 GB
Operation
note: as soon as the wattmeter indicates that the current
is too weak (0.00 A in “Measure current” mode), the time
measurement function stops.
note: the time measurement function stops as soon as you
unplug the electrical appliance you are testing from the
socket 6 of the wattmeter. As soon as you plug another
electrical appliance into the wattmeter, the time measurement
function resumes.
Q  Show energy costs
note: the total cost of the consumed energy is shown in € (Euro).
note: the total cost of the consumed energy is calculated
on the basis of the set price per kWh (See “Set electricity
rate 1 and 2”, “Set electricity flat-rate”).
note: Check that standard displays (see “Measuring the
current“ and “Measuring the mains voltage“) appear in the
top and middle thirds of the LC display 1 .
j 
Press the “PRICE” button 3 until the cost symbol 13
(“TOTAL €”) appears in the bottom third of the LC
display 1 .
j 
The LCD 1 now indicates the energy costs incurred for
use of the electrical appliance.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 29 26.11.10 10:12