Silvercrest SGT 10.6 A2 - Manual (Page 14)

SilverCrest graphics tablet SGT 10.6 A2
12 - English
2. To install the "Macro Key Manager", click on "Macro Key Manager" in the installation
dialogue box.
3. Follow the instructions of the installation wizard.
4. In the last dialogue box click on [OK]. The installation wizard is then closed.
Step 3: Connecting the graphics tablet
Insert the USB connector (H) of the graphics tablet into a free USB
socket on your computer.
The following message then appears after a short time: "Found new
hardware – USB HID (Human Interface Device)".
A new icon then appears in the system tray of the taskbar .
The graphics tablet has then been recognised by your computer and can be used.
If the graphics tablet is not recognised, remove and reinsert the USB connector. You can also try
using a different USB socket on your PC.
Information for users of Microsoft ® Windows ® 7:
Microsoft ® Windows ® 7 has an ink input field. This enables you to make handwritten entries. The
text entered can be used in other programs.
The ink input field is found in the margin of the screen. Move the pen over it and click on it to open
the ink input field: