Silvercrest SSC 1 A1 - Manual (Page 63)

SilverCrest SSC 1 A1
English - 61
Replacing the lenses
Two lenses are supplied with your sports glasses. The
tinted lenses are mounted by default and the clear
lenses are accessories. Two replace the lenses,
proceed as follows:
A Loosen the lens on the sides to remove it. To do so,
slightly press the lens into the direction of the arrow
to release it from the groove. Next slightly lift the
lens to the front.
B Slightly press the lens into the direction of the arrow
to release it from the groove. Next slightly lift the
lens to the front.
C Remove the lens from the groove. Then you can
remove the lens completely.
A To mount the lens, start by inserting it into the lower
groove.
B Fix the lens into the upper groove by pressing it
against the glasses case.
C Laterally fix the lens by pressing it into the direction
of the arrow against the glasses case. Double-
check that the lens seats properly in the groove
and, if necessary, re-adjust and fix it.