Charging the battery, Setting date and time – Silvercrest SSC 1 A1 User Manual

Page 64

Advertising
background image

SilverCrest SSC 1 A1

62 - English

Charging the battery

Before the first use or whenever the built-in battery is
empty, charge it as follows:

 Open the cover for the USB port (7).
 Connect the USB cable to the USB port (7) and to

a free USB port of your powered-on PC. Or use a
USB power adapter (not supplied).

The power/charge indicator (3) lights orange while
the battery is charging. When the battery is fully
charged, the power/charge indicator (3) goes out.

 Disconnect the USB cable and close the USB port

(7) cover.

While the sports glasses battery is being charged,
they must never be covered as the battery can heat
up during charging.

Setting date and time

In order to have your recordings saved with the
correct date and time, you have to set the date and
time once as follows:

 Use the card reader of your computer.
 Insert the microSD card directly into the microSD

card reader or into the microSD adapter.

 If you are using the microSD adapter, insert it into

the SD card reader on your computer (normally
labelled SD/MMC).

 The PC will add the memory card contents under

the drive letter representing the card reader in My
Computer.

 Open My Computer on your PC and double-click

on the drive representing the card reader.

Advertising