Silvercrest SSOT 6 B2 - Manual (Page 113)

113 GB
button 3 . The symbol will appear in the LC display
4 and the measurement will start after an acoustic
signal.
6. The end of the measurement is indicated by 2 acoustic
signals.
7. Now you can read off the measurement result on the
LC display 4 . At the same time, one of the 3 LEDs
will come on.
Note: LED green
7 no fever 34.0 °C - 37.4 °C
(93.2 °F - 99.4 °F)
LED orange
6 slight increase in temperature
37.5 °C - 37.9 °C (99.5 °F - 100.3 °F) LED red fever
5 38.0 °C - 42.9 °C (100.4 °F - 109.2 °F)
8. Values can be displayed in °C as well as in °F
(see “Functions / error analysis - selecting the
temperature unit”).
9. Repeat steps 3 to 6 to carry out further measurements.
Note: The appliance automatically switches off if it is not
operated for longer than 1 minute. When the sleep mode
has been activated, the LC display
4 switches itself off .
When the sleep mode has been deactivated, the appliance
switches to standard mode. If the thermometer has been
operated under normal conditions, the result of the last
measurement taken before the appliance was switched off
is stored. The measured value is available again along
with information on the date, time and measurement mode
when the “MEM / SET” button
9 is pressed again. The
appliance has 9 storage spaces (see “Functions / error
analysis - the memory function”).
IB_106635_SSOT6B2_DE_FR_IT_GB_LB1.indd 113 19.09.14 14:00