Silvercrest SSOT 6 B2 - Manual (Page 110)

110 GB

Do not use the thermometer with external ear disorders
(e.g. infl ammation of the ear canal, injuries to the outer
ear). The condition of the aff ected areas could worsen.

Do not use the thermometer straight after bathing or
swimming when the ear canal is wet. This could dam-
age the ear canal.

Due to the risk of contamination of the measuring
head
1 , clean the appliance after every use.

In this mode, only measure the temperature in the ear
and at no other place on the body.
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking the measurement.
2. Carefully press on the protective cap 8 and remove it
with a gentle rotary motion and without using any force.
3. Check that the measuring head 1 and the measuring
sensors are clean.
4. Carefully clean the ear canal with a cotton bud.
5. Pull the outer ear, tilted slightly upwards/to the rear,
towards the back of his head, so that the ear canal is
freely accessible and there are no impediments be-
tween the measurement sensor and the eardrum.
6. Please keep the outer ear slightly extended and now
carefully insert the measuring head 1 into the ear canal.
7. Briefl y press the “EAR” button 2 . The symbol will
appear in the LC display 4 and the measurement
will start after an acoustic signal.
8. The end of the measurement is indicated by means of
2 acoustic signals.
IB_106635_SSOT6B2_DE_FR_IT_GB_LB1.indd 110 19.09.14 14:00