Silvercrest CM-3500 - Manual (Page 126)

Stereo Hi-Fi System CM-3500
124 - English
Tuning a Radio Station
ƒ Press the UP button (7) on the device or the button (44) on the remote
control to increase the tuned frequency.
ƒ Press the DN button (8) on the device or the button (33) on the remote
control to decrease the tuned frequency.
Each step corresponds to 50 kHz.
or
ƒ Keep the corresponding button pressed for a while to start an automatic
station scan upwards or downwards. The scan will stop automatically as
soon as a station has been found.
Saving a Station
The Micro Stereo Hifi system can store up to 30 stations. Storing the station is
possible via the remote control only. Therefore, all buttons mentioned
hereafter apply to the remote control. Proceed as follows to save a station:
ƒ Look for the desired station manually or by using the automatic station scan
(see above, Tuning a Radio Station).
ƒ Press the PROG button (34). The display (3) will show a blinking number
(01 to 30) that corresponds to the memory preset followed by the selected
frequency.
ƒ While the number indicating the preset memory is blinking you can select a
different memory preset. Press the MENU/FOLDER /PS + button (46) or
the MENU/FOLDER/PS - button (35) to select a different memory preset.
ƒ Press the button PROG (34) to save the station at the selected memory
preset.
or
ƒ Wait until the memory preset indication stops blinking. Then the station will
be saved automatically.