Extron electronic Digital Video Scaler Series DVS 304 AD - Manual (Page 66)

Serial Communication, cont’d
DVS 304 • Serial Communication 3-26
3. Click the I/O Config button to configure the inputs from the I/O Configuration
Window.
4. Click the Input Config (advanced) button for advanced input parameters, as
shown below.
5. Adjust Input Timing, Pixel Phasing, and Start location to desired parameters.
Click on Exit Config to exit the Advanced Input Configuration window.
6. When configuration is complete or to completely exit the program, click
on the X in the top right corner of the DVS 304 Windows Control Program
window that was opened in step 2 above.