Extron electronic Digital Video Scaler Series DVS 304 AD - Manual (Page 83)

A-3 DVS 304 • Menu System
Start Auto Image menu
Default Cycle
INPUT 1
COMPOSITE
2 sec.
2 sec.
OUTPUT
1024 x 768@60
MENU
START AUTO
IMAGE ON IN1
PRESS NEXT
TO START
NEXT
NEXT
Input Configuration menu
START AUTO
IMAGE ON IN1
INPUT
CONFIG
MENU
NEXT
INPUT 2
YUVi
INPUT 4
RGB SCALED
NEXT NEXT
ASPECT RATIO
4x3
TTLPIX PHASE
XXXX 08
NEXT NEXT NEXT
H START V
50 33
H ACTIVE V
XXX XXX NEXT
FILM MODE
<OFF> ON
SDI INPUT
<*> 1 2 3 4 NEXT NEXT
Displays only when applicable
Displays only when applicable Displays only when applicable
SDI DE-INTER
FIELD STNDRD NEXT
Displays only when applicable
Select video format
• Composite
• S-video
• YUVi
• YUVp
• YUV Auto Assign SDI to Input #
• 1, 2, 3, 4, * (none) Select video format
• Composite
• S-video
• RGBcvS
• YUVi
• YUVp
• RGB scaled
• RGB pass
• Auto detect
Input 1 can only accept
composite video. Input 3
can only accept S-video.
Only Inputs 2 and 4 can
be configured for
different video types,
although an SDI input
can be assigned to any
input.
The SDI input signal can be
assigned to any input. Once
assigned to a specific input,
only an SDI signal can be
accepted on that input. SDI
can be disabled by
selecting the *.
Aspect ratio options
• 4 x 3
• 16 x 9
For YUVp or RGB input only
Total pixels
Specify the
width in pixels of
the total image
area sampled. Pixel phase
Adjust the pixel
sampling point
for a selected
input. Horizontal start
Select for the
left edge of the
active video. Vertical start
Select for the
top edge of the
active video. Horizontal
active pixels
Specify the
width in pixels
of the active
image area
sampled. Vertical active
lines
Specify the
height in lines of
the active image
area sampled. Film mode
Turn On or Off for low
resolution devices.
Not for use with
YUVp or RGB
inputs.
N N SDI De-interlacing options:
• Field Standard
• Field Flip
Picture Control
INPUT
CONFIG
MENU
NEXT
PICTURE
CONTROL
H POS V
000 000 NEXT NEXT
COLOR TINT
064 064 NEXT
DETAIL
064
H PAN V
000 000 NEXT
NEXT
NEXT NEXT
ZOOM
100%
H SIZE V
1024 768
BRIGHT CONT
064 064
Tint adjustment applicable only for
NTSC composite or S-Video inputs
Only applicable when zoom is over 100 %
Horizontal
position
Adjust
horizontal
image
position. Vertical
position
Adjust
vertical
image
position.
Detail
Adjust sharpness of
the image.
Zoom
Allows for 100-200% zoom
while the aspect ratio
remains unchanged. Pan
Move the “zoomed”
image horizontally or
vertically. Available only
when zoom is set over
100%.
Horizontal
sizing
Adjust
horizontal
image
sizing. Vertical
sizing
Adjust
vertical
image
sizing. Brightness
Adjust image
brightness. Contrast
Adjust image
contrast. Color
Adjust color
of image. Tint
Adjust tint
of image.