Extron electronic Digital Video Scaler Series DVS 304 AD - Manual (Page 88)

DVS 304 • Reference Material B-2
Reference Material
Specifications
Video input
Number/signal type .................... 1 (RGBHV, RGBS, RGsB) pass-through, RGBHV, RGBS, RGsB, RGBcvS,
component video, S-video, composite video
1 composite video, S-video, component video (Y, R-Y, B-Y)
1 S-video, 1 SDI (optional, DVS 304D only), 1 composite video
Connectors .................................... (1) 15-pin HD female: RGBHV, RGBS, RGBcvS, component video, S-video,
composite video
3 BNC female component video, S-video, composite video
1 BNC female: SDI (DVS 304D, DVS 304AD only)
(1) 4-pin mini DIN female: S-video
1 BNC female: composite video
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... Analog: 0.0 V to 1.0 Vp-p with no offset
Impedance ..................................... 75 ohms
Horizontal frequency .................... 15 kHz to 100 kHz
Vertical frequency .......................... 50 Hz to 120 Hz
Resolution range ........................... 640x480 to 1600x1200* incl. tri-level sync inputs for 480p, 720p, 1080i,
and 1080p
* Only the reduced blanking version of the 1920x1200 resolution is sampled
at full bit rate
Return loss ..................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V
Video processing
Decoder ........................................... 9 bit digital
Digital sampling ............................ 24 bit, 8 bits per color; 13.5 MHz standard
Colors .............................................. 16.78 million
Video output
Number/signal type .................... 2 scaled or pass-through RGBHV, RGBS, RGsB or
scaled component video (Y, R-Y, B-Y)
Connectors .................................... 5 female BNC
1 female 15-pin HD
Nominal level ................................ 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels ....... 0.0 V to 0.7 Vp-p
Impedance ..................................... 75 ohms
Scaled resolutions .......................... 640x480
1,2,3,4,5,6 , 800x600 1,2,3,4,5,6 , 852x480 1,2 , 1024x768 1,2,3,4 , 1024x852 1,2,3,4 ,
1024x1024 1,2,3 , 1280x768 1,2,3,4 , 1280x800 1,2 , 1280x1024 1,2,3 , 1360x765 1,2,3 ,
1365x768 1,2,3 , 1365x1024 1,2 , 1366x768 1,2,3 , 1400x1050 1,2 , 1440x900 2,3 , 1600x1200 1,2 ,
1680x1050 2 , HDTV 480p 2 , 576p 1,5 , 720p 1,2 , 1080i 1,2 , and 1080p 1,2,3
1 = at 50 Hz 2 = at 60 Hz 3 = at 72 Hz (75 Hz for 1440x900, 24 Hz for 1080p)
4 = at 96 Hz 5 = 100 Hz 6 = 120 Hz
Sync
Input type ...................................... (RGBHV, RGBS, RGsB) pass-through, RGBHV, RGBS, RGsB, RGBcvS
Output type .................................... RGBHV, RGBS, RGsB, and component video tri-level
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 0 V to 1.0 Vp-p