Elation Professional 70 - Manual (Page 22)

DESIGN Brick 70™
©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com
Timer Password
This function allows the last run hours to reset to zero.
Clear Last Run
This function resets the “Last Run Hours” hour calculator. This procedure tracks the
run between service cycles.
• Select “Clear Lamp Run” in the system menu.
• The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time.
• Enter Password
• Press enter to confirm.
• Press the Mode/Esc-button to return to the main menu.
8.2.2. Temperature Info.
This function will display the internal head temperature of the fixture in real time. The
temperature readout is user selectable for either Celsius or Fahrenheit.
8.2.3. Software version
This function will display the current operating software version of the fixture.
• Select “Software Version” in the system menu.
• Press enter to confirm.
• The LCD will read “V-X.X”, “X.X” represents the version number, e.g. “V-1.0”,
“V-2.6”.
• Use the UP and DOWN buttons to toggle through the software version of
different IC’s.
• Press the Mode/Esc-button to return to the main menu.
8.3 Personality:
8.3.1 Status setting
Address via DMX - This function allows the DMX address to remotely be adjusted
from a DMX console. This setting requires special settings for both the controller and