Elation Professional 70 - Manual (Page 35)

DESIGN Brick 70™
©Elation Professional, Los Angeles Ca. 34 www.ElationLighting.com
13. LENS REPLACEMENT
The Design Brick 70 comes with a removable front cover that allows lens assembly to be
changed out to achieve different beam angles.
The lens cover is held in place by two ¼ turn locking fasteners. To remove the cover; 1) Turn
the locking fasteners in a counter-clockwise direction. 2) Once the fasteners are loose lift the
cover straight up to access the four individual lenses. 3) Locate the 8 securing screws on the
inner cover and remove them. 4) Remove the inner cover to access the lenses (see second
illustration below). Once the lenses are changed reassemble in reverse order.