Electrolux EQBL100AS - Manual (Page 15)

electrolux integrated barbecue maintenance/troubleshooting 11
Maintenance Troubleshooting
problem possible cause remedy
"ARBECUEåWONTå
light No gas Check isolation valve
is ON
Gas bottle empty – refill
or change gas bottle
Ignition system
not working Check battery – should
hear a clicking noise
when the knob is
depressed
Replace battery
Manually light the
barbecue
Ignition electrode
wet or dirty Gently clean and dry
electrode ensuring
position is correct
Excess smoke
being emitted
from the cooking
area Gas valve set too
high Turn gas valves down or
turn off selected burners
Smell of gas
DO NOT
ATTEMPT TO
LIGHT THE
APPLIANCE
Gas leak Turn off gas at the
isolation valves
Check for leaks, tighten
joints
If problem persists call
Electrolux Service
The ignition system
To change the battery unscrew the cover. Lift out the spring
and battery. Replace with a new AA battery and replace
the cover. Do not over-tighten the screw cover as this may
distort the trim panel. Test by depressing the knob and an
audible ‘clicking’ sound should be heard.
NOTE
Ensure that the battery has been placed in the correct
orientation.
Air vents
The mounting enclosure air vents should be checked prior
to each use, to ensure they are clear of any obstructions
that may affect the free flow of air.
Stainless steel burners
"URNERSåSHOULDåBEåCHECKEDåATåLEASTåONCEåPERåYEARåANDå
cleaned as necessary. Inspect burners to ensure no
residues have been deposited and gas ports are clear.