Fdb configuration examples, Displaying fdb entries – Extreme Networks Summit 300-48 User Manual
Page 106
106
Summit 300-48 Switch Software User Guide
Forwarding Database (FDB)
FDB Configuration Examples
The following example adds a permanent entry to the FDB:
create fdbentry 00:E0:2B:12:34:56 vlan marketing port 1:4
The permanent entry has the following characteristics:
•
MAC address is 00:E0:2B:12:34:56.
•
VLAN name is marketing.
•
Port number for this device is 1:4.
This example associates the QoS profile qp2 with a dynamic entry that will be learned by the FDB:
create fdbentry 00:A0:23:12:34:56 vlan net34 dynamic qosprofile qp2
This entry has the following characteristics:
•
MAC address is 00A023123456.
•
VLAN name is net34.
•
The entry will be learned dynamically.
•
QoS profile qp2 will be applied when the entry is learned.
Displaying FDB Entries
To display FDB entries, use the following command:
show fdb {<mac_address> | vlan <name> | ports <portlist> | permanent}
where the following is true:
•
mac_address
— Displays the entry for a particular MAC address.
•
vlan <name>
— Displays the entries for a VLAN.
•
ports <portlist>
— Displays the entries for a slot and port combination.
•
permanent
— Displays all permanent entries, including the ingress and egress QoS profiles.
With no options, the command displays all FDB entries.
enable learning port <portlist>
Enables MAC address learning on one or more
ports.
Table 38: FDB Configuration Commands (continued)
Command
Description