Extreme Networks Summit 300-48 - Manual (Page 180)

180 Summit 300-48 Switch Software User Guide
Software Upgrade and Boot Options
Accessing the Bootloader CLI
The Bootloader CLI contains commands that support the selection of image and configuration for the
switch.
To access the Bootloader CLI, follow these steps:
1 Attach a serial cable to the serial console port of the switch.
2 Attach the other end of the serial cable to a properly configured terminal or terminal emulator.
3 Power cycle or reboot the switch.
4 As soon as you see the Bootloader Banner, press the spacebar.
The BOOTLOADER> prompt will appear on the screen.
Table 64 lists the Bootloader commands.
Table 62: Bootstrap Command Options
Option Description
boot Boots a loader.
enable Enables features.
h Accesses online help.
help Accesses online help.
? Accesses online help.
reboot Reboots the system.
rz zmodem download.
show Displays bootstrap information.
use Sets the file to use for config, loader and
image commands.
Table 63: Bootloader Command Options
Option Description
boot Boots an image.
enable Enables features.
h Accesses online help.
help Accesses online help.
? Accesses online help.
reboot Reboots the system.
hi Displays command history.
show Displays bootstrap information.
cd Changes working CF directory.
pwd Prints working CF directory.