Extron electronic 6400s - Manual (Page 32)

Control Software, cont’d
Matrix 3200/6400 Series • Control Software 3-12
How to Create PROGRAM BYTE STRINGS for the Matrix 3200/
6400 System
The Matrix 3200/6400 System can be controlled and programmed through the
RS-232 port via third party control systems. These systems need to be “told” what
bytes to send to the Matrix to perform this control. The Matrix 3200/6400 User’s
Manual provides details of how to build these byte strings (using paper and
pencil), but the Matrix Virtualization/Control Program can make this job much
easier by building the strings for you. To generate the strings:
• Create all the Matrix
System settings
(program) from
either Emulate
mode or being
connected to a
Matrix System.
The Program
Strings that can be
viewed produce
the Current-Ties,
Presets, Audio-
Config, and RGB
Delay settings.
• To see the strings,
click on the T OOLS |S HOW RS-232-S TRINGS menu to show the Program Strings
screen (Figure 3-10.A).
Notes
F
IGURE
3-10.A