Epson COLOR Copy Station 8600 - Manual (Page 108)

108 How To
Installing EpsonNet NDPS Gateway on your NetWare server
You can install EpsonNet NDPS Gateway from the Network
Utility CD-ROM.
Note:
If an older version of EpsonNet NDPS Gateway is already installed, be
sure to unload the NDPS Manager before installing a new version of
EpsonNet NDPS Gateway.
1. Open the NETUTIL folder.
2. Open the ENGW folder.
3. Double-click EDPS2***.EXE.
Note:
The last three characters of the file name, represented by asterisks,
vary depending on the place of purchase.
For detailed information on EpsonNet NDPS Gateway, see the
online guide on the Network Utility CD-ROM.
To view the online guide, follow the steps below.
1. Open the NETUTIL folder.
2. Open the ENGW folder.
3. Double-click index.htm.
Uploading printer driver files to the RMS
After installing EpsonNet NDPS Gateway, you need to upload
the printer driver to the Resource Management Service (RMS).
Upload the printer driver to the NetWare server using NDPS
Broker. For details on the procedure, refer to the section of NDPS
or iPRINT in the NetWare documentation.