Epson COLOR Copy Station 8600 - Manual (Page 93)

How To 93
2
2
2
2
2
2
2
2
2
2
2
2
About modes
If the mode you have logged in is different from the mode you set
for the network interface, a message appears when you try to
configure the network interface for NetWare. If you do not want
to change the current settings, click Cancel and log in again using
the same mode set for the network interface.
Using Bindery Print Server (NetWare 3.x/4.x)
This section contains instructions on using the network interface
in the Print Server mode on NetWare 3.x/4.x/IntranetWare with
Bindery emulation.
Note:
The network interface in the Print Server mode of NetWare 3.x does not
allow you to use the Print Server status display control with
PCONSOLE.
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges. You must log in with the bindery
connection.
3. Configure the network interface using EpsonNet Config. See
the EpsonNet Config Reference Guide for details.
If NetWare objects are already created, you can also use
EpsonNet Config with Web Browser. See "NetWare" on page
166 for details.
Using NDS Print Server (NetWare 4.x/5.x/6.0)
This section contains instructions for using the network interface
in the Print Server mode on NetWare 4.x, IntranetWare, NetWare
5.x, or NetWare 6.0 with NDS mode.
1. Turn on your printer.