Epson COLOR Copy Station 8600 - Manual (Page 126)

126 How To
9. Confirm the Printer Agent that you have just created.
In NetWare Administrator, double-click the NDPS Manager
object and click Printer Agent List. Check that the status of the
Printer Agent you have just created is “Idle”.
Setting the printer on client workstations
For detailed information on setting the printer on client
workstations, see the Novell online documentation.
Settings for UNIX Users
Introduction to UNIX Settings
This chapter explains how to set up the printer for different UNIX
systems using the lpr command.
Your printer supports many standard UNIX commands and can
be configured from a host computer without using a special setup
utility.
Your printer is able to function as a remote printer on systems
using TCP/IP Ethernet transfer with lpr remote printing protocol,
or standard ftp (file transfer protocol).
Note:
Because this printer does not convert data into the printer control
language, a printer driver and filter are necessary for each system.