Epson COLOR Copy Station 8600 - Manual (Page 146)

146 Network Software
Note for users of printers supporting NetWare queue-based
printing:
❏ From any NetWare client, log in to the target NetWare server
or NDS context with supervisor privileges.
❏ You cannot create a print server, print queue, or printer with
Web-based EpsonNet Config. You must create these objects
before using Web-based EpsonNet Config.
3. Click TCP/IP under Network on the Configuration menu to
display the TCP/IP setting screen.
Note:
If you want to configure a protocol other than TCP/IP, see
"Configuration - Network Screens" on page 166.
4. Select a method for acquiring the IP address. When you select
Auto, DHCP becomes available and assigns an IP address
automatically. If you want to set the IP address manually,
select Manual.
Note:
❏ The network administrator must check any changes made to the
IP address settings.
❏ When Auto is selected, DHCP becomes available. To use the
DHCP server, make sure it is installed on your computer and
correctly configured. See your operating system’s online help
for detailed instructions.
❏ If Set Using Automatic Private IP Addressing (APIPA)
is enabled, a private IP address is automatically assigned to the
network interface even when there are no DHCP servers on
your system or your network.
❏ If the Dynamic DNS function is not supported, we recommend
that you select Manual and then enter an IP address. This is
because if you select Auto, the IP address of the network
interface changes every time you turn on the printer so that you
need to change the printer port setting accordingly.