Epson DFX-9000 - Manual (Page 175)

Product Information 175
A
A
A
A
A
A
A
A
A
A
A
A
❏ If the horizontal and vertical perforation cuts cross, do not
print in the area illustrated below.
❏ The thickness of the perforation part when extended should
be 2 mm or less.
❏ The perforation between pages should not extend all the way
to the edges of the paper. Uncut length on the edges should
be 1 mm or more.
❏ When using pre-printed paper, the reflectance of the
pre-printed color should be 60% or less.
A 3 mm
B 28 mm
A 2 mm or less
A paper edge
B uncut part
C cut part
D 1 mm or more