Meliconi Gumbody Universal 6 Light - Manual (Page 7)

14
P R O B L E M S O LV I N G
I N F O - L I N E
If you have any queries about your U N I V E R S A L 6 L i g h t remote control:
• read this Instruction Booklet carefully - you will find an answer to most of your questions
• consult our website www.gumbodylight.com where you will find the answers you need easily and
quickly.
WARRANTY: 2 years
The warranty ceases to be valid if the product
is tampered with or used incorrectly.
Type of remote control GumBody Light
Model UNIVERSAL 6 Light
Purchase date / /
Dealer’s stamp
The symbol of the crossed trash can shown on the remote control indicates that once the product has reached the end of its working life it
should be disposed of separately from other waste. The user should, therefore, take the remote control to a specialised collection centre
for electronic and electrical waste, or hand it over to the dealer when purchasing a new similar remote control, on a one to one basis. Correct
separated collection for subsequent recycling, processing and environmentally compatible disposal contributes in preventing possible
negative effects on the environment and on health and favours the recycling of the materials used in producing the remote control. Improper
disposal of the product by the user leads to application of the penalties as per legislative decree no. 22/1997 (article 50 and following of
decree no. 22/1997).
SOLUTION
Try some of the other frequently-used buttons. If
the problem persists, check that the batteries are
fitted correctly. If necessary, replace them with 2
new 1.5 V AA/LR06 batteries.
Check that the batteries are new and that the remote
control is pointing at the TV without any obstacles
in the way. If necessary, re-programme the remote
control, following the programming procedure
A
or B or C .
The batteries are low. Change them.
You may have used the wrong code. Re-enter the
remote control code, following the programming
procedure
A or B or C .
Programme the remote control following the global
search procedure
C or consult the on-line guide
on the website www.gumbodylight.com to find
the code with which to programme your remote
control.
PROBLEM
The appliance does not respond and the
TV - VCR - SAT- AUX - TER - DVD selection
keys do not light up when a key is pressed.
The appliance does not respond but the
selection keys do light up.
The selection keys flash.
The remote control commands are not all
working correcting.
The code for your appliance is not in the
Code Book.