Rose Electronics UltraMatrix Remote 2 - Manual (Page 35)

ULTRAMATRIX REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 29
Configure Profile
The configure profile menu is used to assign computer access levels, modes, share, scan and logout times.
Figure 24. Configure Profile Menu
Name (Default: Profil x, where x = 1 to 80)
The profile name can be changed to any name up to 8 characters in length. The name can be a specific user, a group
of users within a department, a business department, or any name that defines the profile. To change the profile
name, select the one to change and press [Enter]. An input box will display. Type in a new profile name and press
[Enter].
Access (Default: Group x, where x = 1 to 80)
This field is used to assign each profile to a group. To change the access for a selected profile, select the profile to
change then select the group to change and press [Enter]. A list of groups will display. Select the group that has been
set-up for the selected profile and press [Enter]. A group is set up on the configure group menu.
Mode (Default: Share)
Assigns 1 of 4 modes to a profile. To change the mode, select the profile to change the mode, then select the mode to
change and press [Enter]. A selection box will display. Select the mode needed and press [Enter]. The modes are:
 View – Profiles set to the view mode allow users to switch to any computer, but have no keyboard or mouse
control, only view privileges.
 Share – Profiles set to the share mode allow users to take keyboard and mouse control of a computer on a first
come, first serve basis. Control of the computer is based on the time-out value entered in the share column.
 Control – Profiles set to the control mode allow users to take exclusive control of a computer. No time-out value is
invoked. Other users that try to connect to the same computer can only view the video. They have no keyboard or
mouse control until the user with the control disconnects from the computer.
 Private – This mode is the same as the control mode except other users cannot view the video or access the
computer.
Share (Default: 2 seconds)
This feature allows other users to take keyboard and mouse control of a computer after a specific time of no keyboard
or mouse activity by a user. To change the Share time for a given profile, select the profile, then the Share to change
and press [Enter]. An input box will display. Type in a new share value in seconds and press [Enter]. Valid share
values are 0 to 9999 seconds. The share value is only valid if the profile mode is share.