Rose Electronics ViewLink CATx - Manual (Page 13)

VIEWLINK CATX INSTALLATION AND OPERATIONS MANUAL 7
Keyboard Commands - Country Codes
The following country code table allows you to enter the country code for type of
keyboard and operating system used. This function is only required if your
operating system is country specific and requires that a keyboard map specific for
your operating system be entered. Sun Japanese keyboards and others that require
this should enter their country code.
To enter the country code, enter the following key sequence:
Lctrl, Lshift, l, x, Enter, (non-cap L, x)
or
Lctrl, Lshift, l, x, y, Enter,
where X and Y are keyboard numeric keys.
If the country code number is a single digit (0-9), enter one digit (or two digits,
ie.06), followed by enter. If the country code is a double digit (10-35), enter both
numbers, followed by enter. Each key is pressed and released, and no more than 2
seconds can elapse between any two keys of the sequence, or the command will
abort. The command only has to be entered once. ViewLink CAT5 KVM Extender
saves the value in flash. The entered value does not change if the unit is flashed
with new code.
Code Country Code Country Code Country
00 Not Supported 13 International (ISO) 25 Spanish
01 Arabic 14 Italian 26 Swedish
02 Belgian 15 Japan (Katakana) 27 Swiss/French
03 Canadian-Bilingual 16 Korean 28 Swiss/German
04 Canadian-French 17 Latin American 29 Switzerland
05 Czech Republic 18 Netherlands/Dutch 30 Taiwan
06 Danish 19 Norwegian 31 Turkish-Q
07 Finnish 20 Persian (Farsi) 32 UK
08 French 21 Poland 33 US
09 German 22 Portuguese 34 Yugoslavia
10 Greek 23 Russia 35 Turkish-F
11 Hebrew 24 Slovakia 36-255 Reserved
12 Hungary
Keyboard Commands – Skew Adjustment (Skew models only)
Command Function
Left Ctrl + Left Shift + 1 Increase RED skew by one unit
Left Ctrl + Left Shift + 2 Decrease RED skew by one unit
Left Ctrl + Left Shift + 3 Increase Green skew by one unit
Left Ctrl + Left Shift + 4 Decrease Green skew by one unit
Left Ctrl + Left Shift + 5 Increase Blue skew by one unit
Left Ctrl + Left Shift + 6 Decrease Blue skew by one unit
When adjustments are complete, save the changes (Left ctrl + left shift + k)