Rose Electronics CrystalView DVI Fiber - Manual (Page 22)

SAFETY
18
CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL
Safety
The CrystalView DVI Fiber KVM extender has been tested for conformance to
safety regulations and requirements, and has been certified for international
use. Like all electronic equipment, the CrystalView DVI Fiber should be used
with care. To protect yourself from possible injury and to minimize the risk of
damage to the Unit, read and follow these safety instructions.
 Follow all instructions and warnings marked on this Unit.
 Except where explained in this manual, do not attempt to service this Unit
yourself.
 Do not use this Unit near water.
 Assure that the placement of this Unit is on a stable surface or rack
mounted.
 Provide proper ventilation and air circulation.
 Keep power cord and connection cables clear of obstructions that might
cause damage to them.
 Use only power cords, power adapter and connection cables designed for
this Unit.
 Use only a grounded (three-wire) electrical outlet.
 Use only the power adapter provided with the units.
 Keep objects that might damage this Unit and liquids that may spill, clear
from this Unit. Liquids and foreign objects might come in contact with
voltage points that could create a risk of fire or electrical shock.
 Operate this Unit only when the cover is in place.
 Do not use liquid or aerosol cleaners to clean this Unit. Always unplug
this Unit from its electrical outlet before cleaning.
 Unplug this Unit from the electrical outlet and refer servicing to a qualified
service center if any of the following conditions occur:
 The power cord or connection cables is damaged or frayed.
 The Unit has been exposed to any liquids.
 The Unit does not operate normally when all operating instructions
have been followed.
 The Unit has been dropped or the case has been damaged.
 The Unit exhibits a distinct change in performance, indicating a need
for service.