Rose Electronics CrystalView DVI Fiber - Manual (Page 7)

CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL
3
Features
 Perfect image quality at resolutions up to 1920 x 1200 @ 60Hz using
fiber optic cable over all allowed distances, all lower resolutions with
refresh rates of at least 75Hz
 Extend a KVM station from a CPU up to 33,000 feet (10,000m)
 Supports PS/2 or USB keyboard and mouse (Depending on model)
 Supports all DVI graphic cards and monitors
 Ideal for use with today’s digital flat panel monitors
 Supports 18/24 Bit Color (auto-switching) or fixed 24Bit
 Single / dual video – Serial/Audio models available
 The CrystalView DVI Fiber uses a microprocessor to emulate the
keyboard and mouse. The keyboard and mouse on the receiver do not
have to be connected for the PC to boot; only the transmitter Unit must be
connected to the PC
 Compatible with all operating systems
 Fully automatic KVM sharing on a first-come first-serve basis using the
dual access model
 The computer’s video is displayed on both KVM stations monitors.
 Rack mount kits available
Compatibility
Computers PCs (all operating systems)
Monitors Digital DVI-D
Keyboards PS/2 or USB type keyboards
Mouse PS/2 or USB
NOTE: Devices with PS/2 connectors are not compatible with devices
with USB connectors.
DDC Information
The CrystalView DVI Fiber uses its own internal DC table and in most cases it
is not necessary to make any adjustments to the units. If your system
equipment requires the DDC information to be redefined, please refer to page
12 for detailed instructions on how to change the DDC information.
Package contents
The package contents consist of the following:
 The transmitter and receiver Units
 2-Power adapters for transmitter/receiver units & 2 power cords
 PS/2 model - “Y” cable, CPU adapter cable (DVI to DVI + PS/2)
 USB model – DVI cable + USB cable
 Dual Video model – DVI to DVI cable
 Installation and operations manual
CPU adapter cables and fiber cables are usually ordered separately.