Rose Electronics CrystalLink USB 2.0 CATx - Manual (Page 7)

Transmitter and Receiver Models
The CrystalLink USB2.0 enables users to extend beyond the standard 5m cable limit for USB
peripherals by locating USB device(s) up to 330 feet (100 meters) from the computer.
The local and remote extenders may be hot to the touch when operating at or near the high end of
the certified temperature range
Transmitter Unit
The transmitter connects to the host computer using the supplied standard USB cable. Power for the
transmitter is provided by the Host PC. Power for the receiver is provided by the 24VAC adapter
connected at either the transmitter or receiver end. The transmitter delivers power over the CATx
extension link to the receiver when the included power supply is connected to the transmitter.
1
Top View
2 3
Power and RJ45
4
USB Connector
Item Type Description
1 Link LED (green) Indicates both the transmitter and receiver have power and that the
CATx cable is connected properly.
2 Power Connector The Power Port gives the option to connect power to either the
transmitter or receiver. Connect the supplied 24V, 1A power adapter to
either the transmitter or receiver.
3 Link Port (RJ45) Accepts RJ45 connector for CAT5e cabling (or better).
4 USB Type B Used to connect the transmitter unit to the host computer.
Receiver Unit
The receiver has a USB Type-A port for connecting standard USB devices. The receiver allows you
to connect one USB device directly. Additional devices may be connected by attaching USB hubs to
the receiver unit. The receiver is powered either directly by the included power supply, or via the
CATx link extension cable from the transmitter. The USB port delivers 500mA of current to the
attached USB device.
1
2 3
4
Item Type Description
1 Link LED (green) Indicates both the transmitter and receiver have power and the CATx
cable is connected properly.
2 Power Connector The Power Port gives the option to connect power to either the
transmitter or extender. Connect the supplied 24V, 1A power adapter to
either the transmitter or receiver unit.
3 Link Port (RJ45) Accepts RJ45 connector for CAT5ecabling (or better).
4 USB Type A Accepts a USB device