Rose Electronics RackView 20 User Manual

Page 12

Advertising
background image

Page

12

KVM Rack Drawer 20” WWW.ROSE.COM


Recall

Press the “menu” button to enter, and you will see:
Yes/ No

Select “Yes” button then ‘Menu” button to recall the factory setting.

Select “No “ to return to the previous page.

Exit

Press the “exit” button to quit OSD menu.

Power Indicator

GREEN ON

RED

STANDBY

RED

SUSPEND

RED

OFF



Rear Panel Cable Connections

Depending on which Rackview model you have purchased, the rear panel layout could look like this.

1 = VGA connector

2 = PS2 keyboard connector

3 = PS2 mouse connector

4 = PS2<>USB Switch

5 = USB connector

6 = Audio line-in (optional)

7 = USB connector

8 = DVI-I connector

9 = IEC power socket



Configuring the Display Settings

After connecting the Rackview console and turning on your computer, you may need to configure one or

more of the following display settings:

Display mode (also called desktop area or video resolution)

Refresh rate (also called vertical scan rate or vertical sync)

Color depth (also called color palette or number of colors)

Each video card has several controls that let you adjust the display settings. However, the software and

driver for each video card is unique. In most cases, you adjust these settings by using a program or utility

provided by the manufacturer of the video card.

Advertising