SAF OP-STOP DCI - Manual (Page 10)

OP-STOP DC INJECTION BRAKE
Page 5
2.3 SERVICE CONDITIONS
ELEVATION For altitudes in excess of 2000 meters / 6600 feet above sea
level, all assemblies must be derated 1% for every 100 meters /
330 feet above
AMBIENT
TEMPERATURE Do not install in areas where ambient temperature falls below
0°C / 32°F or exceeds 40°C / 104°F
2.4 DIMENSIONS
DCI
MODEL
Height × Width × Depth
CHASSIS NEMA 1 / NEMA 12
DCI-20
43cm × 22cm × 15cm 33cm × 22cm × 18cm
16" Ч 8.5" Ч 6" 13" Ч 8.5" Ч 7"
DCI-40
43cm × 25cm × 19cm 33cm × 22cm × 18cm
17" Ч 10" Ч 8.5" 17" Ч 12" Ч 8.5"
DCI-80
43cm × 27cm × 21cm 43cm × 30cm × 27cm
17" Ч 10" Ч 8.5" 17" Ч 12" Ч 10.5"
DCI-125
53cm × 27cm × 23cm 53cm × 30cm × 27cm
21" Ч 10.5" Ч 9" 21" Ч 12" Ч 10.5"
DCI-200
28cm × 33cm × 27cm 61cm × 61cm × 30cm
11" Ч 13" Ч 10.5" 24" Ч 24" Ч 12"
DCI-300
42cm × 37cm × 28cm 76cm × 61cm × 30cm
16.5" Ч 14.5" Ч 11" 30" Ч 24" Ч 12"
DCI-500
45cm × 42cm × 36cm 76cm × 61cm × 30cm
17.5" Ч 16.5" Ч 14" 30" Ч 24" Ч 12"
NOTE:
For dimensions of OP-STOP units in conjunction with SAF's OPAL solid state starter, refer to the OPAL
manual reversing chassis dimensions.