TA Triumph-Adler 206ci - Manual (Page 265)

9-25
Setup, Registration, and User Management > System Menu
Sleep Level Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.
Value : Quick Recovery, Energy Saver
NOTE: If the optional Gigabit Ethernet Board is installed, Energy Saver cannot be
specified.
(Detailed settings) Set whether to use the Energy Saver mode for the following functions individually:
Network
USB Cable
Card Reader
RAM Disk
FAX
Application
Value : Off, On
NOTE: When the machine enters Energy Saver, the data stored in the RAM disk will be
deleted. In addition, the machine does not wake from sleep mode when it receives print
data from a PC connected by USB cable. Also, the ID card cannot be recognized.
Sleep Timer Set amount of time before entering Sleep.
Value : 1 to 240 minutes (1 minute increments)
NOTE: If you select [Off] for [Auto Sleep], the time display does not appear.
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses. For details, refer to Responding to Messages on page 10-14.
Value : Off, On
Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value : 5 to 495 seconds (every five seconds)
NOTE: If you select [Off] for [Auto Error Clear], the time display does not appear.
Interrupt Clear Timer Set the period after which the machine reverts to Normal mode when it has been set to
Interrupt Copy mode and then left unused.
Value : 5 to 495 seconds (every five seconds)
Item Description