Eiki 8080 - Manual (Page 11)

Basic Operation
11
5
Connecting a microphone
Connect a monaural dynamic microphone to the
[MIC] connector on the front panel. The connector
accepts a monaural mini plug (ø3.5mm).
If you are connecting a microphone with a built-in
remote switch, connect it to the [MIC] and [REMOTE]
connectors.
CAUTION:
• The [MIC] connector is not compatible with a con-
denser-type microphone. Be sure to use a dynamic
microphone.
6
Connecting an external device
Connect the audio output of an external device to the
[AUX IN] connector on the front panel of the 8080.
The [AUX IN] connector accepts monaural signals
via a monaural mini plug (ø3.5mm).
Use an appropriate commercially available cable.
CAUTION:
• You cannot use the [AUX IN] connector and the
[MIC] connector simultaneously. If you are using the
[AUX IN] connector, remove the microphone from
the [MIC] connector.
7
Listening through the headphones
Connect the standard stereo plug (ø6.3mm) of the
headphones to one of the [HEADPHONES] connec-
tors on right side.
If your headphones use a stereo mini plug
(ø3.5mm), use a commercially available adapter
plug.
When you connect headphones, the internal speaker
output will be muted.
CAUTION:
• You can connect up to five sets of headphones to
the 8080 simultaneously. If you are using multiple
headphones, use the same type so that the volume
level will be consistent among all headphones.
8
Connecting external speakers
Although the 8080 features a built-in speaker, you
can also connect external speakers if desired.
Use the SPEAKERS [LEFT]/[RIGHT] connectors
(which accept monaural ø6.3mm standard plugs) on
the right side.
When you connect external speakers, the built-in
speaker output will be muted.
CAUTION:
• Be sure to use speakers with an impedance of 4 Ω
or higher.
8080 front panel
External device
To audio
output To [AUX IN]
Mini plug
8080 right side panel
Stereo headphones
Standard stereo plug
8080 right side panel Speaker
(right)
Speaker
(left)
Basic Operation