Eiki 8080 - Manual (Page 12)

12
Listening to Tracks on a CD or USB Flash Drive
Pressing the [DISPLAY] button repeatedly cycles through the following
indicators on the display.
■ While playback is stopped:
■ During playback or pause
While the CD player is playing a CD, if you press the [STOP/CLEAR] button, change
the Input Select switch setting, or play back a cassette tape, the CD player will stop
playing and memorize the stopped position. The next time you play the CD, playback
will start from the stopped position. This is called Resume function.
Instead, if you want to play back the CD from the first track, press the [STOP/CLEAR]
button again to cancel the Resume function, then press the [PLAY/PAUSE] button.
The Resume function will also be cancelled when you open the disc cover, remove the
USB flash drive, or turn off the power to the unit.
Set the [CD/USB] Input Select switch to
“USB,” then press the [STOP/CLEAR] but-
ton repeatedly until the unit displays the
following indication.
After the dotted line indicator “-- --” stops
flashing and lights up steadily, make sure
that the USB flash drive’s indicator is
turned off. Then remove the USB flash
drive.
• When the dotted line indicator “-- --” lights
up, you cannot play or record audio using
the USB flash drive. If you wish to do so,
disconnect the USB flash drive, then con-
nect it again.
Press the [STOP/CLEAR] button.
To cancel the Resume function, press the
button again.
Press the [PLAY/PAUSE] button.
The D indicator lights up.
Press the button again to resume play-
back.
DIGITAL DISPLAY
REPEAT 1ALL REMAIN
TRACK NO. TIME
MIN. SEC.
RANDOM
PROGRAM
MEMORY
AUTOMATIC STOP
2 x COUNTER
PUSH
OPEN
VARIABLE PITCH CONTROL
25 RANDOM ACCESS PROGRAM
1
2 2 3
(CD) (USB) CAUTION:
Opening the disc cover during playback or while the CD is paused may cause the spinning disc to fly
out, resulting in personal injury or damage to the disc. Be sure to press the [STOP/CLEAR] button to
cancel playback or pause, wait for more than five seconds, then open the disc cover.
If the CD is still spinning when you open the cover, be careful not to touch the disc.
NOTE:
When you change the [CD/USB] Input Select
switch setting during playback of a CD or USB
flash drive, playback will stop.
Changing the display indication
Music CD MP3/WMA (CD/USB)
Total number
of tracks Total playback
time Total number of files * Total number of folders
* If the stop position is memorized, the position will be displayed.
* If the total number of files exceeds 99,
“--” will be displayed.
Music CD MP3/WMA (CD/USB)
REMAIN
REMAIN
Elapsed track
playback time
Remaining track
playback time
Total remaining playback
time on the disc
Elapsed track
playback time*
Folder number
Track
number
* The time indicator may not display the correct
value for some MP3/WMA files in the following
cases:
- When you play back a VBR (Variable Bit Rate) file.
- When you fast rewind or fast forward a file.
- When you change the pitch (playback speed).
Track
number
Resume function
Disconnecting the USB flash drive
-- --
CAUTION:
Stopping playback
Pausing playback