Eiki 8080 - Manual (Page 19)

Recording to a USB Flash Drive
19
Recording from a Cassette Tape to a USB Flash Drive
Press the [STOP/EJECT] button in the tape transport section. Alternatively, press the [STOP/CLEAR] button, then press
the [STOP/EJECT] button in the tape transport section.
CAUTION:
• If you press the USB [REC] button while the tape is playing, recording will start immediately.
• Audio will be recorded to the USB flash drive in MP3 format with a bit rate of 128kbps. You cannot change this setting.
• Please refer to page 25 for information on the folders and files that are created during USB recording.
• Changing the volume, tone, or balance during recording will not affect the recording.
1
Set the Input Select switch to [USB].
2
Insert a cassette tape.
See page 16.
3
Connect the USB flash drive to the [USB] port.
See page 13.
4
Press the USB [REC] button.
The button blinks red, and the unit enters record
ready mode.
5
Press the [PLAY] button in the tape transport
section.
The tape starts playing, and the USB flash drive auto-
matically starts to record (the USB [REC] button
lights up red).
Tips:
• Pressing the [PLAY/PAUSE] button during record
ready mode will also start recording.
• Pressing the USB [REC] button while recording will
place a track mark (track divider) in the position
where you pressed the button.
DIGITAL DISPLAY
REPEAT 1ALL REMAIN
TRACK NO. TIME
MIN. SEC.
RANDOM
PROGRAM
MEMORY
AUTOMATIC STOP
2 x COUNTER
PUSH
OPEN
VARIABLE PITCH CONTROL
25 RANDOM ACCESS PROGRAM
1
3 2 5 4
NOTE:
Tracks will automatically be
recorded to available space on
the drive.
You do not have to locate the
appropriate position to record
(as you would with a cassette
tape).
Stopping recording
Recording