EZQuest DVD Duplication - Manual (Page 14)

After the image file is successfully loaded, LCD will show the results as follows.
Image load OK
If there is an image file existing in the current partition, the system will ask you
whether to overwrite it or not. Please use
s t
to confirm Yes or No.
Image Exists
Overwrite?Yes
5.9.2 Delete Image
If you want to empty an image file stored in a particular partition, you can use the
function Delete Image to do so. First, select the function by pressing
t
.
9-02. Image P: A
Delete Image
The system will ask if you are sure to delete. Use s t to confirm Yes or No.
Delete Image in
Partition A?Yes
Page 14