EZQuest DVD Duplication - Manual (Page 17)

5.9.5 Select Partition
This function is to select a partition in the hard disk. First, select the function by
pressing
t .
9-05.Image P: A
Select Partition
After installing a hard disk, your copy smart plus will format it automatically. Each
partition will occupy 5GB. The number of partitions is dependent on the hard diskís
capacity. The partitions is alphabetically arranged. Now select a working partition
by pressing
s t
, and LCD will show the message as follows.
Select Working
Partition - A
After the partition is selected, LCD will show the results as follows.
Set Partition to
A
5.9.6 Select Src Drive
This function is to select DVD-ROM or any of the DVD writers as the source from
which you can load data into a particular partition as an image file.
Page 17