EZQuest DVD Duplication - Manual (Page 42)

Press ENT to enter the next figure. Use s t to confirm Disk or Parti.
Verify Disk or
Partition? Disk
Press ENT to verify. After verification LCD will show the results as follows.
Verify Hard Disk
OK!
5.12.6 Burn-in
On the above figure press ESC and t
to enter the following figure. Burn-in is to
simulate the copying progress many times. The time can be from 1 to 1000. After
each cycle of simulation, the DVDs on the DVD writers will eject automatically and
recede for the next bout of simulation.
12-06. Adv Setup
Burn-in
Press ENT to enter the next figure. Test is simply a simulation.
Burn-in
Test
Page 42