Exabyte EXB-8205 - Manual (Page 17)

7. Locate the power connector on the back of the tape
drive. Connect the power cable to the power
connector as shown in Figure 8.
CAUTION
The power cable plug and the power connector are
keyed so they can fit together in only one way.
Before connecting the plug to the tape drive, be
sure that the beveled edges of the plug are oriented
in the same way as the beveled edges on the power
connector. Do not force the plug into the connector
or you may damage the tape drive.
8. Replace the cover on your computer.
Figure 8 Connecting the power cable to the tape drive
May 1994 EXB-8205 and EXB-8505 (Standard and XL) 17