How to order, Limited warranty, Operation winch information chart – Fulton Performance XLT18ZB101 User Manual
Page 2
Use only Cequent Trailer Products parts or parts of equal quality for repair. Replacement parts are available through Cequent Trailer Products Customer
Service Department, 715-693-1700 or 800-604-9466. Please specify product model number. Vfor additional details.
How to Order
Warranty. Cequent Trailer Products, Inc. ("We") warrants to the original consumer purchaser ("You") that the product will be free from defects in material
and workmanship for a period of one year for Value Series products, three years for Standard Series and five years for High Performance Series ,
under normal use and service and subject to the terms of this Limited Warranty. If the product does not comply with this warranty, We will replace the
product without charge to You and within a reasonable time or, at our option, refund the purchase price. This warranty is not transferable. A warranty
replacement or repair of a claimed nonconforming product shall not extend the warranty period.
Limitations on the Warranty. The warranty does not cover the following: (a) normal wear and tear; (b) damage through abuse, neglect, misuse (such as use
inconsistent with our operating and maintenance instructions) or accident; (c) damage from misapplication, overloading, or improper installation; (d) improper
maintenance or (e) a product altered in any manner by anyone other than us. OUR EXPRESS WARRANTY STATED ABOVE IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE EXPRESSLY DISCLAIMED, SUBJECT TO ANY STATE LAW LIMITATION
THAT MAY APPLY TO YOU.
Obligations of Purchaser. To make a claim, contact us at 1050 Indianhead Drive, Mosinee, WI 54455, 1-800-604-9466, identify the product, and follow the
instructions that will be provided. At our request, you must return any allegedly nonconforming product to us for inspection, testing and validation of the
nonconformity. Any returned product that is replaced or refunded becomes our property. You will be responsible for shipping costs to us. Your purchase
receipt to verify date of purchase must be produced with your warranty claim.
Remedy Limits. Refund of the purchase price or replacement of the product is your sole remedy under this or any other warranty on the product. WE WILL
NOT BE LIABLE FOR ANY CLAIMS OF ANY KIND GREATER THAN THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT WILL WE
BE LIABLE FOR YOUR PURCHASE OF SUBSTITUTE GOODS, OR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES, SUBJECT TO ANY STATE LAW LIMITATION THAT MAY APPLY TO YOU.
Legal Rights. This warranty gives you specific legal rights, and You also may have other
rights which vary from state to state.
This warranty is governed by the laws of the
United States of America and is void where prohibited.
Cequent Trailer Products
1050 Indianhead Dr., P.O. Box 8 Mosinee, WI 54455-0008
800/604-9466 715/693-1700 Fax 715/693-1799
Limited Warranty
Let Line/Load Out:
Before turning the handle, firmly grip the winch handle and disengage the ratchet pawl or engage it
in the reverse direction. You may have to take in a small amount of line to allow the ratchet pawl to
unload. With a firm grip on the winch handle, slowly let out line. If you must stop before the load is
fully out, be sure the ratchet pawl is engaged in the forward or loading position and gradually release
the winch handle to be sure the ratchet pawl is holding the load.
Take Line/Load In:
Be sure the ratchet pawl is engaged in the forward or loading position. As you turn the handle, make
sure the cable, strap, or rope is winding onto the drum properly. If you must stop before the load is
fully in, be sure the ratchet pawl is engaged and gradually release the winch handle to be sure the
ratchet pawl is holding the load.
Braking (Winches Equipped with Optional Hand Brake):
Apply the brake to help control the load by pressing down on the hand brake lever. Do not let go of
the winch handle while letting line out, and do not attempt to stop a spinning winch handle.
Shifting (2-Speed Winches Only):
Make sure that the ratchet pawl is properly engaged and holding the load before attempting to change
gears. T3700 winches change gears by relocating the winch handle onto a different input shaft.
Other 2-speed winches shift by disengaging the shift lock lever, sliding the input shaft, and
reengaging the shift lock lever. The shift lock lever must be firmly in place in an inner or outer
groove on the input shaft during winch operation. Inner and outer grooves, drive gear is engaged,
center groove is neutral.
Operation
Winch Information Chart
Rope
Steel Cable (3)
Strap
600 lbs.
T600
3.1:1
6"
34:1
Two-way
36' x 1/4"
N/A
15' x 2"
1/4" x 2-1/2" Grade 5
T900
3.1:1
7"
39:1
Two-way
36' x 1/4"
N/A
15' x 2"
1/4" x 2-1/2" Grade 5
T903
3.1:1
7"
39:1
Two-way
36' x 1/4"
N/A
12' x 2"
1/4" x 2-1/2" Grade 5
1100 lbs. T1100
4.1:1
7"
43:1
Two-way w/neutral 30' x 5/16"
N/A
20' x 2"
1/4" x 2-1/2" Grade 5
1300 lbs. T1300
4.1:1
8"
49:1
Two-way w/neutral 30' x 5/16"
N/A
20' x 2"
1/4" x 2-1/2" Grade 5
1400 lbs. XLT14
4.1:1
8"
43:1
Two-way
N/A
N/A
20' x 2"
5/16" x 2-1/2" Grade 5
1500 lbs. T1500
4.1:1
8"
49:1
Two-way w/neutral 20' x 5/16"
N/A
20' x 2"
1/4" x 2-1/2" Grade 5
1600 lbs
T1602
5.1:1
9"
56:1
Two-way
20' x 7/16"
N/A
20' x 2"
3/8" x 2-3/4" Grade 5
T1801
5.1:1
10"
62:1
Two-way
20' x 7/16"
N/A
20' x 2"
3/8" x 2-3/4" Grade 5
XLT18
5.1:1
10"
62:1
Two-way
N/A
N/A
20' x 2"
3/8" x 2-3/4" Grade 5
2100 lbs. T2100
5.1:1
10"
62:1
Two-way
20' x 7/16"
N/A
20' x 2"
3/8" x 2-3/4" Grade 5
T2005
4.1:1 & 9.8:1
10"
87:1
Two-way w/neutral 20' x 7/16"
N/A
N/A
3/8" x 2-3/4" Grade 5
T2025
4.1:1 & 9.8:1
10"
64:1
Two-way w/neutral
N/A
50' x 7/32"
N/A
Cable only (3)
T2605 5.1:1 & 12.2:1
10"
108:1
Two-way w/neutral 24' x 7/16"
N/A
N/A
3/8" x 3-1/2" Grade 5
T2625 5.1:1 & 12.2:1
10"
79:1
Two-way w/neutral
N/A
175' x 7/32"
N/A
Cable only (3)
3200 lbs. T3205 5.1:1 & 12.2:1
10"
79:1
Two-way w/neutral
N/A
175' x 7/32"
N/A
Cable only (3)
3700 lbs. T3700 5.1:1 & 12.2:1
10"
102:1
Two-way
N/A
185' x 7/32"
N/A
Cable only (3)
Strap Bolt Size,
where applicable
(not included in all models)
SINGLE SPEED WINCHES
TWO SPEED WINCHES
2600 lbs.
1800 lbs.
900 lbs.
Max. Mech.
Adv. (2)
Ratchet Pawl
Style
Drum Storage
2000 lbs.
Capacity
(1)
Fulton
Part No.
Gear Ratio
Handle
Length
(1) Capacity is based on direct line pull on first layer of the line on the drum. Capacity is reduced as line builds up on the drum.
(2) Maximum Mechanical Advantage is based on first layer of recommended line on the drum. For maximum efficiency use only the amount of line
required.
(3) Only winches that are shown to accommodate steel cable can use steel cable. Winches designed for steel cable have a larger drum hub to reduce the
bending fatigue of the cable and extend the cable life. Neatly wrapping the cable is necessary to reduce the chance of kinking or fraying.
Ratchet Pawls Engaged
One-Way
Two-Way
With Neutral
Two-Way
Ratchet Pawls Disengaged
One-Way
Two-Way
With Neutral
Two-Way
Ratchet Pawl