SAF-HOLLAND XL-FW10062UM Electronic Lock Indicator System (ELI) for FW35 Series Fifth Wheels User Manual

Page 2

Advertising
background image

2

XL-FW10062UM-en-US Rev A · 2011-12-01 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

Contents

Contents Page

Introduction ..............................................2
Notes, Cautions, and Warnings ..................2
Section 1 – Model Indentification ..............3
Section 2 – General Safety Instructions .....4
Section 3 – Fifth Wheel Intended Use ........5
Section 4 – Fifth Wheel

NON-Intended Use ..................5

Introduction

This manual provides you the information
necessary for the proper operation and
maintenance of the Electronic Lock Indicator
System (ELI) for the Holland FW35 series
fifth wheels.

NOTE: For Holland replacement

components contact SAF-HOLLAND
Customer Service: 1-888-396-6501.

Notes, Cautions, and Warnings

You must read and understand all of the
procedures presented in this manual before
operating or starting work on any Electronic
Lock Indicator System (ELI) for the Holland
FW35 series fifth wheels.

IMPORTANT: Keep this manual in

a safe location for
future reference.

Proper tools must be used to perform
the maintenance and repair procedures
described in this manual.

NOTE: In the United States, work

shop safety requirements are
defined by federal and/or state
Occupational Safety and Health
Acts. Equivalent laws may exist
in other countries. This manual is
written based on the assumption
that OSHA or other applicable
employee safety regulations are
followed by the location where
work is performed.

Throughout this manual, you will notice the
terms “NOTE,” “IMPORTANT,” “CAUTION,”
and “WARNING” followed by useful product
information. So that you may better
understand the manual, those terms are
defined as follows:

NOTE: Includes additional information

to enable accurate and easy
performance of procedures.

IMPORTANT: Includes

additional

information that if
not followed could
lead to hindered
product performance.

Used without the safety
alert symbol, indicates
a potentially hazardous
situation which, if not
avoided, may result in
property damage.

Indicates a potentially
hazardous situation
which, if not avoided,
may result in minor or
moderate injury.

Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.

Contents Page

Section 5 – Coupling Preparation ..............5
Section 6 – Operating Procedures .............5
Section 7 – Response to Improper

Couple Signal .........................7

Section 8 – Error Code Diagnostics ............8
Section 9 – Maintenance ...........................9
Warranty ................................................. 10

Advertising