Euphonix MC Control - Manual (Page 25)

professional control surface
Artist Series
USER GUIDE
COMMON TASKS
25
7. Press the BANK
X key (Figure 3-2) to shift tracks over four at a time.
If tracks 1–4 were assigned to strips 1–4, tracks 5–8 are now assigned to
strips 1–4.
NUDGE W and BANK W keys perform similar operations but in the opposite
direction.
Inserts
1. Add a plug-in on track 1 of your application.
2. If tracks 1–4 are not assigned to strips 1–4, press and hold the Shift key (Fig-
ure 3-3) and press the
BANK W key to restore tracks 1–4 to strips 1–4.
3. Press strip 1’s fader SEL key.
4. Press the BACK key (Figure 3-2) until the top-level knobset is displayed on the
Touchscreen.
5. Press the INSERTS Soft Knob (Figure 3-1).
The names of the plug-ins on that track are distributed across the Soft
Knobs.
6. Press the Soft Knob beside the desired plug-in’s name to select it.
The plug-in’s parameters are distributed across the Soft Knobs.
7. Turn the Soft Knob beside the desired parameter to adjust its value.
8. Press the PAGE keys to access more parameters.
9. Press the BACK key to exit that plug-in.