Euphonix MC Control - Manual (Page 38)

professional control surface
Artist Series
USER GUIDE
SURFACE CONTROLS
38
4.7 Jog Wheel and Transport Controls
The Jog Wheel controls jog, shuttle, zooming, and other functions. Surrounding
it are keys that control Jog Wheel functions and transport keys.
Many EuCon applications control far more functions with the Jog Wheel, such as
trimming clip head and tail, setting clip gain, making cross fades, etc. These
functions are accessed using Soft Keys.
Figure 4-7 Jog wheel and transport keys
4.7.1 Jog Wheel Functions
JOG: Press the JOG key and spin the Jog Wheel clockwise and counterclock-
wise to move forward and backward, respectively, on the timeline. The yellow
LED lights in this mode.
SHUTTLE : Press the SHUTTLE key and spin the Jog Wheel clockwise and coun-
terclockwise to adjust the forward and backward playback speed, respec-
tively.The playback speed is proportional to the wheel’s position. The yellow
LED lights in this mode.
ZOOM HORIZ: Press ZOOM HORIZ and spin the Jog Wheel to zoom horizontally
in the application, typically for the arrange or project window time line. The yel-
low LED lights in this mode.
ZOOM VERT : Press ZOOM VERT and spin the Jog Wheel to zoom vertically, typi-
cally to adjust the track height or waveform in the arrange or project window.
The yellow LED lights in this mode.
JOG
SHUTTLE
ZOOM HORIZ
ZOOM VERT
REC
REW
FF
ST
OP
PL
AY
JOG/ SHUTTLE
Shift key
Transport
Jog Wheel
keys
key
ZOOM HORZ
key
ZOOM VERT