Amprobe THWD-10 THWD-10W RH-Meters - Manual (Page 17)

10
Auto power off 15 minutes, press power key to
resume operation.
Battery 4 X 1.5V AAA
Battery Life 200 hours typical with carbon zinc
battery.
Dimensions 160mm(H) x 83mm(W) x 38mm(D);
6.3 in (H) x 3.3 in (W) x 1.5 in (D).
Weight Approx. 230g (0.5lb) including
batteries.
Supplied Probe 4 feet type “K” thermocouple
bead wire (Teflon tape insulated).
Maximum insulation temperature
260°C (500°F).
Wire accuracy ±2.2°C or ±0.75% of
reading (whichever is greater) from
0°C to 800°C (32°F to 1472°F).
Wireless Features
Frequency range 910~920MHz (THWD-10W)
Low current consumption less than 1mA.
The transmitting distance can reach 25M without
magnetic interference.
�
- EMC: Conforms to EN61326-1.
This product complies with requirements of the
following European Community Directives: 89/ 336/
EEC (Electromagnetic Compatibility) and 73/ 23/ EEC
(Low Voltage) as amended by 93/ 68/ EEC (CE Marking).
However, electrical noise or intense electromagnetic
fields in the vicinity of the equipment may disturb the
measurement circuit. Measuring instruments will also
respond to unwanted signals that may be present within
the measurement circuit. Users should exercise care and
take appropriate precautions to avoid misleading results
when making measurements in the presence of electronic
interference.