Amprobe IR-750 Infrared-Thermometer - Manual (Page 18)

14
Main Screen
1 command enables you to create New, Save file and set the numbers of measurement (1000, 5000,
10000, 50000, 100000 or limitless).
2 command enables you to view the software operation instructions.
3 Blinking indicates IR-750 / IR-750-EUR is connected to the software
4 Main display screen of measurement
5 Secondary display screen for measurement data
6 Measurement data in graph
Using Program
button enables you to connect to IR-750 / IR-750-EUR thermometer and start measurement. “USB
Connect” blinking indicates that the IR-750 / IR-750-EUR Thermometer is successfully connected to the
PC and that the thermometer will automatically start taking measurements. The primary display screen shows
current measurement temperatures and the secondary display screen shows all measurement data.
Download Data enables you to download temperature measurements saved in IR-750 / IR-750-EUR Thermometer.
Tick “Download Data” and then click “USB Connect”; the saved data will automatically upload to your PC and
display on secondary display.
Exit and close the program
1 Print data
2 Save data (*.txt, *.xls, *.xml)
3 Open files (*.txt, *.xls, *.xml)
4 Deleting current data and create a new data.
1
2
3
4
5
6
1
2
3
4