Avago Technologies MegaRAID Fast Path Software - Manual (Page 162)

Page 162 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Viewing and Changing Device Properties
6. Select the desired link speed from the Select Link Speed field using the drop-down
selector.
The link speed values are Auto,1.5, 3.0 or 6.0 Gbps.
NOTE: By default, the link speed in the controller is Auto or the value last saved by the
user.
7. Click OK.
The link speed value is now reset. The change takes place after you restart the
system. The message box appears, as shown in the following figure.
Figure 109: System Restart Required Message Box
4.8.7 Viewing Enclosure Properties Using WebBIOS, you can view the enclosure properties of all of the enclosures
connected to the server.
Follow these steps to view enclosure properties.
1. Go to the Physical view of the WebBIOS Utility.
2. Click the enclosure node.