3 ipv6 nd snooping enable (global mode), 4 ipv6 nd snooping mac-binding-limit, Nd snooping enable – PLANET XGS3-24040 User Manual

Page 305: Lobal mode, Nd snooping mac, Binding, Limit

Advertising
background image


23-18

Receive packet, smac 00-21-27-aa-0f-46, dmac 00-30-4f-00-de-01,

saddr fe80::221:27ff:feaa:f46, daddr 2001::1,

interface Ethernet1/17(portID 0x1000011), vid 1, length 90,

type 135, opcode 0, target address 2001::1

23.3 ipv6 nd snooping enable (Global mode)

Command:

ipv6 nd snooping enable

no ipv6 nd snooping enable

Function:

Enable/disable the monitoring function of ND Snooping globally.

Parameter:

None.

Command mode:

Global Mode.

Default:

Disable the global function of ND Snooping.

Usage Guide:

Only after ND Snooping enabled globally, the port configuration of ND Snooping is allowed, NA/NS

packets of all ports are not forwarded, but are copied to cpu. After being processed by ND Snooping,

these packets are forwarded according to the set rules.

Example:

Enable the ND Snooping globally.

Switch(config)#ipv6 enable

Switch(config)#ipv6 nd snooping enable

23.4 ipv6 nd snooping mac-binding-limit

Command:

ipv6 nd snooping mac-binding-limit <number>

no ipv6 nd snooping mac-binding-limit

Function:

Configure the max number of IPv6 addresses that can be bound to the same MAC address.

Parameter:

<number> is the max value. It only includes the dynamic binding number, the corresponding static

binding number is not limited, the range from 1 to 10.

Default:

10.

Command mode:

Global Mode.

Usage Guide:

Advertising