PLANET VIP-281SW - Manual (Page 47)

Check to enable VAD (Voice Activity Detection) function. Vad
Default : Disable
Select caller ID mode as FSK (Bellcore), FSK (ETSI), FSK (BT),
FSK (NTT), or DTMF from Phone to send out.
Caller ID Mode
Default : DTMF
Check to send FSK Date and Time to caller ID display device. FSK Date & Time Sync
Default : Disable
Check to send reverse polarity before caller ID. Reverse Polarity before Caller
ID
Default : Disable
Check to send short ring before caller ID. Short Ring before Caller ID
Default : Disable
Check to send dual tone before caller ID. Dual Tone before Caller ID
Default : Disable
Check to send caller ID before first ring. Caller ID Prior First Ring
Default : Enable
Set caller ID DTMF start digit. Caller ID DTMF Start Digit
Default : DTMF_A
Set caller ID DTMF end digit. Caller ID DTMF End Digit
Default : DTMF_C
Set Minimum and Maximum Flash time. Flash Time Setting (ms)
[ Space:10, Min:30, Max:2000 ]
Default : 200 ~ 500
Set Speaker voice volume. Speaker Voice Gain (dB)
[ -32~31 ], Mute:-32
Default : 0
Set microphone voice gain volume. Mic Voice Gain (dB) [ -32~31 ],
Mute:-32
Default : 0
- Hot Line
- 47 -