PLANET CS-2001 User Manual
Page 132
Advertising
121
Step 4. Go to Network > Interface Group and then set as below:
(Figure 3-35)
Configure Port1(WAN1), Port2(LAN1) and Port3(LAN2) as Group
1.
Click OK.
Figure 3-35 Interface Group Settings
Note:
1. Then, users on the same subnet may be divided into different interface according to their
departments. For example, Port2(LAN1) connects to PCs under sales department, and
Port3(LAN2) connects to PCs under support department.
Advertising