PLANET CS-2001 User Manual
Page 168
157
Terms in Authentication
Authentication Management
Provides basic settings for managing authentication:
Authentication Port Number
: The port number designated for
authentication. By default, it is 82.
Authentcation Idle Timeout
: If an authenticated connection has been idle
for a period of time, it will expire. The default is 30 minutes.
Log off users that have logged in for
: Determines the valid time for the
authenticated connection. Authentication expires on the due time.
Allow password modification
: The authenticated users may change the
password by themselves.
Deny multi-login if auth user has login
: When enabled, once a user has
logged in with his / her own authentication account no other user is
permitted to log in to the same account.
Successful Authentication Redirect URL
: Authenticated user can be
redirected to the designated web site by assigning its address to this field.
Leaving it blank means the user will just go directly to their desired web
site.
Login Display Message
: The message shown (HTML supported) in the
login screen. Leaving it blank will result in no message be shown.
Go to Policy Object > Authentication > Settings and configure as
below:
（Figure 8-1）