PLANET UMG-2000 - Manual (Page 41)

41
INTERNET SETTING:
This section lists the current settings of the Internet:
ISP Type: Displays the ISP type.
IP Address: Displays the IP address of the WAN port of UMG-2000 Series.
Subnet Mask Address: Displays the subnet mask address.
Default Gateway Address: Displays the IP address of the default gateway.
Primary DNS Address: Displays the primary DNS address.
Secondary DNS Address: Displays the secondary DNS address.
Internet Link Speed: Displays the maximum speed of the Internet link.
LOCAL NETWORK SETTING
This section lists all the current settings of LAN:
Connected Users: Displays the number of users that have been connected to
the UMG-2000 Series.
Local Server Address: Displays the LAN IP address of the UMG-2000 Series.
Subnet Mask Address: Displays the LAN subnet mask address.
DHCP Server: Displays the state of the DHCP server, enabled or disabled.
DHCP Range Start Address: Displays the start address of the DHCP IP range.
DHCP Range End Address: Displays the end address of the DHCP IP range.
Local Network Link Speed: Displays the maximum speed of the LAN link.
INTERNET SERVICES
This section lists the service state of the WAN services:
Internet Domain Name: Displays the Internet domain name.
DNS Server: Displays the state of the DNS service, enabled or disabled.
Email Server: Displays the state of the email service, enabled, or disabled.
PPTP VPN Server: Displays the state of the PPTP VPN server, enabled or
disabled.
Network Storage: Displays the state of the network storage service (SAMBA),
enabled or disabled.
LOCAL NETWORK SERVICES
This section lists the service state of the LAN services:
Domain Controller: Displays whether the UMG-2000 Series is the domain
controller.
Domain Work Group: Displays the Windows workgroup that UMG-2000 Series
belongs to.
NTP Server: Displays the state of the NTP server, enabled or disabled.