PLANET UMG-2000 - Manual (Page 46)

46
Security Key: Specifies the key for the clients to access this AP if WEP is the
data encryption type.
Note:
You cannot detect the AP if “Hide SSID” is enabled.
6.3 Wireless Clients
The wireless “Clients” screen shows the wireless clients current connection to the
UMG-2000 Series wireless Access Point (AP). Each connected wireless clients
information is listed in a tabulated form. The following are the wireless client connection
information.
WIRELESS CLIENT
This section lists the current information on the connected wireless clients.
MAC Client: Displays the MAC Address of the wireless client.
IP Address: Displays the IP Address of the wireless client.
Hostname: Displays the host name of the wireless client.
Channel: Displays the connected channel number.
Rate: Displays the data transfer rate.
6.4 Blocking the Connected Wireless Client
The administrator can block any connected wireless client by clicking the “block” button.
The selected wireless client will be blocked and access will be denied.